New interface for MicroPilot autopilots with OxTS GNSS/INS

MicroPilot, a leading provider of autopilots for unmanned aerial vehicles (UAV), has completed integration work with an OxTS xNAV system. The interface will allow MicroPilot systems to use the blended…

3DTarget choose OxTS for multi-platform LiDAR system

The 3DT-SCANFLY is a new lightweight integrated LiDAR system designed not only for UAVs, but for multiple platforms such as ground vehicles, air, and pedestrians. To ensure robust, survey-grade georeferencing…

Track Access Services using OxTS Survey+

Track Access Services (TAS) are a small UK-based company and OxTS customer that have been short-listed for several awards based on the innovative survey, design and simulation services it supplies…

xNAV550 used with Riegl VUX-1 laser scanner on Aeroscout UAV to survey power lines

Aeroscout_Powerlines

In UAV surveying, payload and accuracy are two of the most important factors for both manufacturers and customers alike. Without adequate payload, it is not always possible to carry the…

xNAV550 GNSS/INS used to survey Severn Bridge

While our inertial navigation systems are often used to measure the position and attitude of moving objects, one of our xNAV550s has recently been put to novel use when it…

GeoTracker – a new mobile mapping system

When Magnus Larson, survey engineer at WSP in Sweden, purchased his first OxTS Inertial+ from us in 2010, little did we know about the task that lay ahead of him. Now,…

Position and orientation for UAV helicopters

OxTS’ GNSS/INS systems are used by many companies in the mobile mapping and airborne laser scanning industry for reliable, high accuracy position, roll, pitch, heading and velocity measurements at data…

Position and orientation for UAV helicopters

            OxTS’ GNSS/INS systems are used by many companies in the mobile mapping and airborne laser scanning industry for reliable, high accuracy position, roll, pitch,…