Visit Support Centre Visit Support Centre Find a Distributor Find a Distributor Contact us Contact us

Webinar: Advanced setup for LiDAR surveying, using drones

Webinars April 14, 2020 Webinar

Join Sam Souliman, Senior Support Engineer at OxTS, to learn how best to configure an OxTS Inertial Navigation System (INS) for LiDAR surveying, using drones. 

This is an advanced session for experienced NAVconfig users. If you are less experienced with how an OxTS INS device works, we recommend you attend the introduction to OxTS’ Inertial Navigation Systems and introduction to NAVconfig, before attending this one.  

This session will cover the: 

  • Correct initialisation procedure for OxTS units mounted on drones. 
  • Correct warm up procedure for OxTS units mounted on drones. 
  • Importance of vibrations level settings. 
  • Use of GNSS recovery and GNSS weighting options. 
  • Importance of accurate configuration and tight tolerances. 
  • Use of SBAS \ NTRIP \ field base station \ RINEX corrections. 
  • Use of altitude reference 

OxTS Support

We ran this session several times throughout April 2020, to enable our global audience to attend when most convenient for them.

If you missed this session, you can listen to a recording via this link.

To view more webinars from the OxTS Centre of Excellence and learn with confidence, please click here.

 

 

 

 

 

return to top

Return to top

Columbus, US