To get the best position and orientation data possible, survey and mapping professionals must pair their LiDAR devices with an INS.
However, pairing LiDAR and INS devices can, by design, create inaccuracies due to offsets that are difficult to measure without some form of data-driven calibration. Without this calibration these inaccuracies can prove detrimental to your survey run and leave you with a point cloud you cannot deliver to your customer.
During this webinar, OxTS Product Engineer, Jacob Amacker will discuss how you can get the best output from your data; providing attendees with a live boresight calibration demonstration and showing you how to create a pointcloud using OxTS Georeferencer.
During the webinar you will learn:
- A number of ‘best practises’ to ensure you’re getting the most out of your LiDAR and INS data
- How to perform a boresight calibration
- How to create an accurate, geo-referenced pointcloud using OxTS Georeferencer
- The difference between a boresighted vs unboresighted pointcloud
If you missed the live sessions, you can watch a recording here.
Learn more…
- Read about a ‘day in the life’ of your presenter. Click here for Jake’s blog.
- Read our article that accompanies this webinar: How to get the best data and improve pointcloud accuracy
- Learn about improving LiDAR survey applications with a data-driven approach to hardware set-up via this link.
- Refresh on the basics by reading our ‘What is a Pointcloud?’ article.
- To view more webinars from the OxTS Centre of Excellence and learn with confidence, please click here.
