Visit Support Centre Visit Support Centre Find a Distributor Find a Distributor Contact us Contact us

Webinar (in Chinese): How to get the best from your data: A boresight calibration demo of how to create a Pointcloud

Webinars November 26, 2020 Webinar

To get the best position and orientation data possible, survey and mapping professionals must pair their LiDAR devices with an INS.

However, pairing LiDAR and INS devices can, by design, create inaccuracies due to offsets that are difficult to measure without some form of data-driven calibration. Without this calibration these inaccuracies can prove detrimental to your survey run and leave you with a point cloud you cannot deliver to your customer.

During this webinar, OxTS Support Engineer, Chen Liangyu will discuss how you can get the best output from your data; providing attendees with a live boresight calibration demonstration and showing you how to create a pointcloud using OxTS Georeferencer.
在本次研讨会中,OxTS技术支持工程师 陈亮宇 会讲解如何最大程度地利用您的测绘数据,并演示如何使用OxTS开发的轴线校准工具 – 数据驱动的校准方式。

Boresight calibration pointcloud support from OxTS

During the webinar you will learn:

  • A number of ‘best practices’ to ensure you’re getting the most out of your LiDAR and INS data
  • How to perform a boresight calibration
  • How to create an accurate, geo-referenced pointcloud using OxTS Georeferencer
  • The difference between a boresighted vs unboresighted pointcloud


This session was presented live on Thursday 26th November, at 20:00 hrs Beijing time (12:00 hrs GMT).


If you missed this session, you can watch a recording via this link.





Further resources:






return to top

Return to top